news inbanner

EPON+PoE ONU Monitoring Network Solution

Sources:       author:admin       hits:1713       time:2021-08-26

With the development of the economy and the acceleration of urban construction, all over the world has entered the era of wireless coverage, and access to the Internet anywhere and anytime has become a way of life. At the same time, security issues have emerged in all regions of the world, with public security issues extending to all areas of society, including production, life, environment, technology and information. Especially in recent years, with the development of information technology, the need to build a harmonious society, the construction of safe cities and the security needs of large events and exhibitions, the demand for effective management of public safety is becoming more and more exuberant and the standards are getting higher and higher. After the rapid construction of the "safe city" network proposed by the state, the share of the use of network cameras has grown rapidly, and the share of the use of PoE switches has also grown rapidly.

 

In order to create a low cost, high efficiency, more flexible and convenient HD surveillance network, Aoyuan Technology has also launched its own PoE solution.

 

PoE Introduction   

 PoE (Power over Ethernet) provides 48 volts from the device side through the LAN cable, the network terminal does not need to be powered by a separate power adapter. A complete PoE system includes two parts: the PSE device and the PD device, which is the administrator of the entire PoE Power over Ethernet process. The PD device is the client device of the PoE system, i.e. the PSE load that receives the power supply.

 

PoE is powered by two methods: Mid-Span uses 4/5 and 7/8 wire pairs to transmit DC power, i.e. using unused free pairs in the Ethernet cable to transmit DC power, and the PSE at the corresponding endpoint supports PoE-enabled Ethernet switches; End-Span uses 1/2 and 3/6 wire pairs to transmit DC power, i.e. using different frequencies than the Ethernet data signal. The End-Span method uses 1/2 and 3/6 wire pairs to transmit DC power, i.e. the DC power is transmitted simultaneously on the core wire used to transmit the data, and the power is transmitted at a different frequency from the Ethernet data signal.

 

Advantages of PoE networking

 

1 flexibility, PoE only need to install a network cable to allow the device to work and signal transmission;

2 cost saving, many cameras need to be deployed near the AC power supply, and the use of PoE power supply, not only saves the cost of purchasing power, but also reduces the time spent on installing power;

3 Intelligent power supply, the product uses the most advanced intelligent sensing algorithm, according to the handshake agreement with the receiving end, PoE power supply switch according to the equipment for power supply, if the equipment does not need power supply, PoE power supply switch. If natural power failure, no power supply, the signal can still work normally, both safe and stable;

4 In the wireless LAN, PoE can simplify the task of RF testing, access points can be easily moved and accessed.

5 Centralised power supply, one switch can power up to 8 devices at the same time for easy management, plus a single UPS can provide power to all devices in the event of a power failure.

EPON + PoE ONU network diagram


 

Solution Instruction

 

        The NF5802CST OLT is placed in the server room and the uplink port is connected to a switch, which can also be connected to a hard disk recorder, decoder etc. The PON optical port of the NF5802CST OLT is connected to a splitter placed in the destination splitter box via a fibre optic cable. The branch line of the splitter can be connected to the optical port of the PoE ONU either by optical cable or by using a skinned optical cable. Terminal devices such as network cameras and wireless APs are connected to the PoE ONU via a network cable, at which point the PoE ONU can supply power to the cameras and wireless APs as well as communicate via the network cable. If it is an ordinary ONU, it can also be connected to a PoE switch, and the PoE switch can then be connected to the camera and wireless AP.


您的浏览器版本太低

请升级您的浏览器:Internet Explorer11 或以下浏览器: Firefox / Chrome / 360极速浏览器

TOP